Knowledge Base

Fsys.umass, new version won't die on umount   ________________________________________________________________________ Applicable Environment ________________________________________________________________________ Topic: Fsys.umass: new version won't die on umount SDP: 4.25 Target: Any supported target ________________________________________________________________________ Issue ________________________________________________________________________ QNX 4.25 Including 2010 patch for USB. After terminating Fsys.umass via "/bin/rm /dev/usb0" to release a USB stick a process remains in memory. After using USB flash stick several times, there were several instances of the Fsys.umass driver running. ________________________________________________________________________ Recommendation ________________________________________________________________________ Known problem. Fixed in new version. Work around is to run: > Fsys.umass fsys -n 0=hd_usb > slay Fsys.umass > rm /dev/hd_usb <unpug/plug stick> ________________________________________________________________________ NOTE: This entry has been validated against the SDP version listed above. Use caution when considering this advice for any other SDP version. For supported releases, please reach out to QNX Technical Support if you have any questions/concerns. ________________________________________________________________________ Related Attachments  None Found

Please contact us with your questions or concerns.