cam-optical.so

Runs on:

QNX Neutrino

Options:

driver

One of the devb-* drivers.

The optical options control the driver's interface to cam-optical.so. If specified, they must follow the optical keyword:

name=prefix

Specify the device prefix (default: mo).

nobios

Don't use the geometry from BIOS int 13. By default, if you don't specify the translation option, the BIOS geometry is used.

noptab

Don't use the geometry from the partition table. The geometry from the partition table is used if you specify the nobios option, or the BIOS geometry is invalid.

retries=num@path_id:target:lun

Set the maximum number of command retries on the specified path, target, and Logical Unit Number (LUN). The default is 10.

rmb=[true|false]@path_id:target:lun

Set/clear the device as removable on path N, target N, and LUN N.

timeout=g1:g2:g3:rw@path_id:target:lun

Set the rw and group command timeouts on path N, target N, and LUN N. The defaults are the values from the Timeout and Protect mode page if supported, otherwise 60:90:10:10 (in seconds).

translation=heads[:sectors[@path_ID[:target[:lun]]]]

Specify the geometry explicitly; this overrides the geometry from the BIOS and the partition table. The arguments are:

• heads and sectors — report this many heads (and optionally, sectors) to io-blk.so for hard disks (default is 64 heads and 32 sectors). This information is needed only to let fdisk write the correct boot cylinder for booting.
• path_ID — the number of the controller to use, where the first controller is 0 (the default).
• target — for IDE, this is the master (0) or slave (1); for other drivers, it's the device ID. The default is 0.
• lun — the Logical Unit Number. The default is 0.

verbose=verbosity@path_id:target:lun

Set the verbosity level on path N, target N, and LUN N.

Description:

The cam-optical.so provides common access methods (CAMs) for optical disk devices.