Booting QNX Neutrino

To boot your board, follow the instructions in the BSP User's Guide

Booting QNX Neutrino RTOS on your target board usually involves the following steps:

  1. Set hardware switches on the board, if required.
  2. Connect the board's power supply.
  3. Power up the board.
Note: See the BSP User's Guide for your BSP for platform-specific boot instructions.

When your board has booted, you can use any built-in shell command or command residing in the OS image to test if QNX Neutrino RTOS is running. For example, from the command line for your target system type:

ls